Datamax W-Class Maintenance Manual page 42

 Press on the Lever to gain access to the Cutter Blades. Wipe the blade surfaces clean using a cotton
swab dampened with WD-40™ (or similar product). Close the blades.
 Replace the Cover and Left and Right Shields to the cutter using the previously removed screws.
 Mount the cutter onto the Mounting Pins and reconnect the Cutter Cable to the inside port. Close the
cutter. Lower the cover of the printer. Reattach the cutter tray. Plug in and turn 'On' the printer.
Adjustments and Maintenance
2-32