Platen Roller - Datamax W-Class Maintenance Manual

Removal and Replacement

4.8 Platen Roller

Removal:
1. Turn 'Off' and unplug the printer.
2. Remove the covers; see Section 4.1.
3. Unlatch and raise the Printhead Assembly. Remove media from the printer.
4. Loosen the three screws securing the Drive Motor Bracket. Unhook and remove the Lower Tensioner
Spring.
5. Slip the Timing Belt off the Platen Pulley.
6. Remove the Platen Pulley and bearing (not shown) from the Platen Shaft.
4-23