Datamax W-Class Maintenance Manual page 74

6. Disconnect the two cables from the Printhead and remove the Printhead from the printer.
Replacement:
1. While holding the new Printhead under the Printhead Assembly, carefully reconnect the two cables to
the Printhead, ensuring both cables are properly seated in the connectors.
2. Insert the Printhead Screws and secure the Printhead.
3. Clean the Printhead; see Section 2.4.1.
4. If removed, reinstall the ribbon. Lower and lock the Printhead Assembly.
If replacing the printhead in a W-8306 model, see Section 2.2.4 and adjust the printhead supply
voltage before proceeding.
CAUTION
.
Removal and Replacement
4-4