Datamax W-Class Maintenance Manual page 16

Advanced Entry Calibration (continued)
Step Action
8 Press the
9 Press the
Place the label under the
Sensor Eye Mark and
lower the printhead
assembly.

Note:
10 Press the
select the setting (denoted
by an '*'). Record this
sensor reading (the 'yyy'
value) as a Label Value in
a table similar to the one
shown below.
Next, press the
Key to increment the Gain
Number.
Repeat this step for each
of the Gain Numbers (00-
32).
Sample table:
Use a list similar to
the one shown right,
with enough rows to
record the data for
each of the 33 Gain
Numbers.
Adjustments and Maintenance
Displayed Message
Key.



Key.




Do NOT move the position of the Media Sensor after it has been adjusted.
Key to




Gain
Number
00
01
02
...
32
You are beginning the Advanced
Entry Calibration.
If using preprinted media, ensure
the label area under the sensor is
free of preprinted text, graphics,
-Or-
borders or perforations.
Where 'yyy' is a numerical value
representing the current sensor
reading: useful in locating the best
-OR-
sensor position.

Note: Never position the sensor
over a perforation when recording a
sensor reading.
Label TOF
Value Value
255
2-6
Comment
Difference
Value