Figure 7-5 Menu 11.3: Remote Node Network Layer Options For Ethernet Encapsulation; Table 7-4 Remote Node Network Layer Options Menu Fields - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
FIELD
Nailed-Up
Connections
7.4 Edit IP
Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to open Menu 11.3 - Network Layer Options.

Figure 7-5 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation

This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP
Addr field for Ethernet encapsulation. The following table describes the fields in this screen.

Table 7-4 Remote Node Network Layer Options Menu Fields

FIELD
IP Address If your ISP did not assign you an explicit IP address, press [SPACE
Assignment BAR] and then [ENTER] to select Dynamic; otherwise select Static
and enter the IP address & subnet mask in the following fields.
(Rem) IP If you have a Static IP Assignment, enter the IP address assigned to
Address you by your ISP.
7-8
Table 7-3 Fields in Menu 11.1 (PPTP Encapsulation)
Press [SPACE BAR] and then [ENTER] to select Yes if you want to
make the connection to this remote node a nailed-up connection.
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
DESCRIPTION
EXAMPLE
No
EXAMPLE
Dynamic
(default)
Remote Node Setup