Configuring The Pptp Client - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
FIELD
Encapsulation
Service Type
Note: DSL users must choose the Standard option only. The My Login, My Password and Login
Server fields are not applicable in this case.
My Login
My Password
Login Server
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
Network Address
Translation
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
6.3

Configuring the PPTP Client

The ZyWALL supports only one PPTP server connection at any given time.
To configure a PPTP client, you must configure the My Login and Password fields for a PPP connection and
the PPTP parameters for a PPTP connection.
After configuring My Login and Password for PPP connection, press [SPACE BAR] and then [ENTER] in
6-2
Table 6-1 Menu 4: Internet Access Setup Menu Fields
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for the IP Address field.
Press [SPACE BAR] and then [ENTER] to select Standard, RR-Toshiba
(RoadRunner Toshiba authentication method), RR-Manager (RoadRunner
Manager authentication method) or RR-Telstra. Choose a RoadRunner flavor if
your ISP is Time Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it does
not, then you must enter the authentication server IP address.
If your ISP did not assign you a fixed IP address, press [SPACE BAR] and then
[ENTER] to select Dynamic, otherwise select Static and enter the IP address and
subnet mask in the following fields.
Enter the (fixed) IP address assigned to you by your ISP (static IP address
Assignment is selected in the previous field).
Enter the subnet mask associated with your static IP.
Enter the gateway IP address associated with your static IP.
Please see the NAT chapter for a more detailed discussion on the Network Address
Translation feature. The choices are Full Feature, None or SUA Only.
DESCRIPTION
Internet Access