Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name=N/A
Outgoing=
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
PPTP :
My IP Addr=
My IP Mask=
Server IP Addr=
Connection ID/Name=
Press Space Bar to Toggle.
Figure 7-4 Menu 11.1: Remote Node Profile for PPTP Encapsulation
The next table shows how to configure fields in menu 11.1 not previously discussed above.
FIELD
Encapsulation
My IP Addr
My IP Mask
My Server IP Addr
Connection
ID/Name
Schedules
Remote Node Setup
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Table 7-3 Fields in Menu 11.1 (PPTP Encapsulation)
Press [SPACE BAR] and then [ENTER] to select PPTP. You must
also go to menu 11.3 to check the IP Address setting once you
have selected the encapsulation method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must
follow the "c:id" and "n:name" format.
This field is optional and depends on the requirements of your DSL
modem.
You can apply up to four schedule sets here. For more details refer
to the Call Schedule Setup chapter.
ZyWALL 10~100 Series Internet Security Gateway
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-up Connections=
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
DESCRIPTION
EXAMPLE
PPTP
10.0.0.140
255.255.255.0
10.0.0.138
N:My ISP
7-7