Figure 19-3 Menu 11.3 Remote Node Network Layer Options; Table 19-2 Menu 11.3 Remote Node Network Layer Options - ZyXEL Communications PRESTIGE 650H User Manual

IP Options:
IP Address Assignment= Dynamic
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Multicast= None
IP Policies= 3,4,5,6
Press ENTER to Confirm or ESC to Cancel:

Figure 19-3 Menu 11.3 Remote Node Network Layer Options

The next table explains fields in Menu 11.3

Table 19-2 Menu 11.3 Remote Node Network Layer Options

FIELD
IP Address Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
Assignment node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the ISP
node (also the one you configure in menu 4). All other nodes are set to
Static.
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet Type the subnet mask assigned to the remote node.
Mask
My WAN Some implementations, especially UNIX derivatives, require separate IP
Addr network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the IP
address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router address.
NAT Press [SPACE BAR] and then [ENTER] to select Full Feature if you have
multiple public WAN IP addresses for your Prestige.
Select SUA Only if you have just one public WAN IP address for your
Prestige. The SMT uses Address Mapping Set 255 (menu 15.1 - see
section 22.3.1).
Select None to disable NAT.
Remote Node Configuration
Menu 11.3 - Remote Node Network Layer Options
Version= RIP-1
Bridge Options:
Ethernet Addr Timeout (min)= N/A
Remote Node Network Layer Options.
–
DESCRIPTION
Prestige 650 Series User's Guide
EXAMPLE
Dynamic
SUA Only
19-7