Figure 6-3 Internet Access Setup (Pppoe); Table 6-3 New Fields In Menu 4 (Pppoe) Screen; Basic Setup Complete - ZyXEL Communications ZyWall 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
The following table describes the fields in this screen.
FIELD
Encapsulation
Idle Timeout
If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11 and enter the
PPPoE service name provided to you in the Service Name field.
6.5

Basic Setup Complete

Well done! You have successfully connected, installed and set up your ZyWALL to operate on your network
as well as access the Internet.
When the firewall is activated, the default policy allows all communications to the
Internet that originate from the LAN, and blocks all traffic to the LAN that
You may deactivate the firewall in menu 21.2 or via the ZyWALL embedded web configurator. You may
also define additional firewall rules or modify existing ones but please exercise extreme caution in doing so.
See the firewall chapters for more information on the firewall.
6-4
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel:

Figure 6-3 Internet Access Setup (PPPoE)

Table 6-3 New Fields in Menu 4 (PPPoE) screen

Press [SPACE BAR] and then press [ENTER] to choose PPPoE.
The encapsulation method influences your choices in the IP
Address field.
This value specifies the time in seconds that elapses before the
ZyWALL automatically disconnects from the PPPoE server.
originates from the Internet.
DESCRIPTION EXAMPLE
PPPoE
100
(default)
Internet Access