This chapter describes how to configure the ZyWALL 100's DMZ using Menu 5: DMZ Setup.
5.1
Configuring DMZ Setup
From the main menu, enter 5 to open Menu 5 – DMZ Setup.
5.2
DMZ Port Filter Setup
This menu allows you to specify the filter sets that you wish to apply to your public server(s) traffic. This
feature is not available on all models.
DMZ Setup
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Figure 5-1 Menu 5: DMZ Setup
Menu 5.1 – DMZ Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 5-2 Menu 5.1: DMZ Port Filter Setup
ZyWALL 10~100 Series Internet Security Gateway
Chapter 5
DMZ Setup
5-1