Configuring The Wireless Client - ZyXEL Communications P-2612HNU-F1 User Manual

Click Connection Status > System Info.Verify your wireless and wireless
6
security settings under Device Information and check if the WLAN connection is
up under Interface Status.
Tutorial: Network > Wireless LAN > SecuritOpen the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status
Tutorial: Status
This finishes the configuration of the AP.

3.3.3 Configuring the Wireless Client

This section describes how to connect the wireless client to a network.
3.3.3.1 Connecting to a Wireless LAN
The following sections show you how to join a wireless network using the ZyXEL
utility, as in the following diagram. The wireless client is labeled C and the access
point is labeled AP.
Wireless LAN Setup
C
There are three ways to connect the client to an access point.
• Configure nothing and leave the wireless client to automatically scan for and
connect to any available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific
network or peer computer.
P-2612HNU-Fx User's Guide
AP
Chapter 3 Tutorials
43