Configuring The Wireless Client; Connecting To A Wireless Lan - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 2 Tutorials
Click the WLAN Station List hyperlink in the AP's Status screen. You can see if
7
any wireless client has connected to the AP.
Figure 8 AP: Status: WLAN Station List

2.2.3 Configuring the Wireless Client

This section describes how to connect the wireless client to a network.

2.2.3.1 Connecting to a Wireless LAN

The following sections show you how to join a wireless network using the ZyXEL
utility, as in the following diagram. The wireless client is labeled C and the access
point is labeled AP.
There are three ways to connect the client to an access point.
• Configure nothing and leave the wireless client to automatically scan for and
connect to any available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific
network or peer computer.
32
C
AP
P-2812HNU-51c User's Guide