The Smtp Redirect Add/Edit Screen - ZyXEL Communications UAG5100 User Manual

Figure 127 Configuration > Network > SMTP Redirect
The following table describes the labels in this screen.
Table 90 Configuration > Network > SMTP Redirect
LABEL
Enable SMTP
Redirect
Add
Edit
Remove
Activate
Inactivate
Move
#
Status
User/Group
Incoming
Interface
Source Address
SMTP Server
Apply
Reset

18.2.1 The SMTP Redirect Add/Edit Screen

Click Network > SMTP Redirect to open the SMTP Redirect screen. Then click the Add icon or
select an entry and click the Edit icon to open the screen where you can configure the rule.
Chapter 18 SMTP Redirect
DESCRIPTION
Select this option to turn on the SMTP redirect feature on the UAG.
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change a rule's position in the numbered list, select the rule and click Move to display
a field to type a number for where you want to put that rule and press [ENTER] to move
the rule to the number that you typed.
The ordering of your rules is important as they are applied in order of their numbering.
This field is a sequential value, and it is not associated with a specific entry.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This is the user account or user group name to whose SMTP traffic this rule is applied.
This is the name of the interface on which the SMTP traffic must be received.
This is the name of the source IP address object from which the SMTP traffic should be
sent. If any displays, the rule is effective for every source.
This is the IP address of the SMTP server to which the matched SMTP traffic is forwarded.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
UAG5100 User's Guide
203