Web Configurator Screens Overview - ZyXEL Communications UAG5100 User Manual

Click Login. If you logged in using the default user name and password, the Update Admin Info
4
screen appears. Otherwise, the dashboard appears.
Follow the directions in the Update Admin Info screen. If you change the default password, the
5
Login screen appears after you click Apply. If you click Ignore, the Installation Setup Wizard
opens if the UAG is using its default configuration; otherwise the dashboard appears.
B
C

1.4.2 Web Configurator Screens Overview

The Web Configurator screen is divided into these parts (as illustrated on
• A - title bar
• B - navigation panel
• C - main window
1.4.2.1 Title Bar
Figure 3 Title Bar
The title bar icons in the upper right corner provide the following functions.
Table 2 Title Bar: Web Configurator Icons
LABEL
Logout
Help
About
Site Map
Object Reference
Console
CLI
About
Click About to display basic information about the UAG.
Chapter 1 Introduction
DESCRIPTION
Click this to log out of the Web Configurator.
Click this to open the help page for the current screen.
Click this to display basic information about the UAG.
Click this to see an overview of links to the Web Configurator screens.
Click this to check which configuration items reference an object.
Click this to open a Java-based console window from which you can run command line
interface (CLI) commands. You will be prompted to enter your user name and password.
See the Command Reference Guide for information about the commands.
Click this to open a popup window that displays the CLI commands sent by the Web
Configurator to the UAG.
UAG5100 User's Guide
21
A
page 21):