The Vpn Connection Add/Edit Screen - ZyXEL Communications UAG5100 User Manual

Table 131 Configuration > VPN > IPSec VPN > VPN Connection (continued)
LABEL
Connect
Disconnect
Object
Reference
#
Status
Name
VPN Gateway
Encapsulation
Algorithm
Policy
Apply
Reset

30.2.1 The VPN Connection Add/Edit Screen

The Add/Edit VPN Connection screen allows you to create a new VPN connection policy or edit an
existing one. To access this screen, go to the Configuration > VPN > IPSec VPN > VPN
Connection screen (see
entry and click the Edit icon.
Chapter 30 IPSec VPN
DESCRIPTION
To connect an IPSec SA, select it and click Connect.
To disconnect an IPSec SA, select it and click Disconnect.
Select an entry and click Object Reference to open a screen that shows which settings use
the entry. See Section 10.3.2 on page 129
This field is a sequential value, and it is not associated with a specific connection.
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
The connect icon is lit when the interface is connected and dimmed when it is disconnected.
This field displays the name of the IPSec SA.
This field displays the associated VPN gateway(s).
This field displays what encapsulation the IPSec SA uses.
This field displays what encryption and authentication methods, respectively, the IPSec SA
uses.
This field displays the local policy and the remote policy, respectively.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
Section 30.2 on page
UAG5100 User's Guide
for an example.
290), and either click the Add icon or select an
291