Ap Management Screen - ZyXEL Communications UAG5100 User Manual

Each field is described in the following table.
Table 46 Configuration > Wireless > Controller
LABEL
Registration
Type
Apply
Reset

9.3 AP Management Screen

Use this screen to manage all of the APs connected to the UAG. Click Configuration > Wireless >
AP Management to access this screen.
Figure 78 Configuration > Wireless > AP Management
Each field is described in the following table.
Table 47 Configuration > Wireless > AP Management
LABEL
Edit
Remove
Reboot
#
IP Address
MAC Address
Chapter 9 Wireless
DESCRIPTION
Select Manual to add each AP to the UAG for management, or Always Accept to
automatically add APs to the UAG for management.
Note: Select the Manual option for managing a specific set of APs. This is recommended as the
registration mechanism cannot automatically differentiate between friendly and rogue
APs.
APs must be connected to the UAG by a wired connection or network.
Click Apply to save your changes back to the UAG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select an AP and click this button to edit its properties.
Select an AP and click this button to remove it from the list.
Note: If in the Configuration > Wireless > Controller screen you set the Registration
Type to Always Accept, then as soon as you remove an AP from this list it
reconnects.
Select an AP and click this button to force it to restart.
This field is a sequential value, and it is not associated with any entry.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
UAG5100 User's Guide
115