Boottest - HP Integrity rx2620 User's & Service Manual

Utilities
EFI/POSSE Commands

boottest

Interacts with the speedy boot variable allowing it to be set appropriately.
Syntax
boottest
boottest on
boottest off
boottest [test]
boottest [test] [on|off]
Parameters
[test] Each test can be set or cleared:
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example C-6 boottest Command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest Setting
------------- -------------------------
booting_valid On (OS speedy boot aware)
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
Example C-7 boottest early_cpu off Command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest Setting
------------- -------------------------
booting_valid On (OS speedy boot aware)
early_cpu Skip this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
176
Displays status of all speedy boot bits
Run all tests (for a normal boot time)
Skip all tests (for a faster boot time)
Displays status of specific Speedy Boot bit
Sets or clears a specific Speedy Boot bit
Enable/disable system firmware response to BOOTING
bit. If OS Speedy Boot aware set to on.
Enable/disable early CPU selftests.
Enable/disable late CPU selftests.
Enable/disable system board hardware tests.
Enable/disable CEC tests.
Enable/disable EFI driver Core I/O tests.
Enable/disable memory initialization.
Enable/disable full destructive memory tests.
Appendix C