Figure 4-52 Remove The System Board; Figure 4-53 Slide System Board Into Chassis - HP Integrity rx2620 User's & Service Manual

Removing and Replacing Components
Removing and Replacing Internal Components
Step 8. Remove the system board:
a. Grasp the memory controller chip heatsink and slide the system board toward the front of the
server. This releases the system board from its chassis standoffs.
b. Lift up the processor module side of the system board and slide it free of the PCI cage bay. See
Figure 4-52 for more information.

Figure 4-52 Remove the System Board

Replacing the System Board
Step 1. Remove the old system board.
Step 2. Grasp the new system board by its edges and carefully align it in the server:
a. Angle the board to allow the PCI connector to slide into the PCI cage bay area. See Figure 4-53
for more information.

Figure 4-53 Slide System Board into Chassis

94
Front of server
Front of server
Chapter 4