Removing And Replacing The Front Bezel; Figure 4-6 Closing The Top Metal Cover; Figure 4-7 Front Bezel Retaining Clip - HP Integrity rx2620 User's & Service Manual

Removing and Replacing Components
Removing and Replacing System Top Metal Cover and Bezels
Step 2. Grasp the blue release lever and slide the top metal cover toward the front of the server until the
lever snaps into place. See Figure 4-6 for more information.

Figure 4-6 Closing the Top Metal Cover

Step 3. Slide the server into the rack enclosure and connect the power cables.

Removing and Replacing the Front Bezel

You must remove the front bezel from the chassis to remove or replace the power supplies or the optical drive.
Removing the Front Bezel
Step 1. Press in on the retaining clips located on the right-side of the front panel. See Figure 4-7 for more
information.

Figure 4-7 Front Bezel Retaining Clip

52
Front of server
Front of server
Chapter 4