b. Align the system board keyholes with their standoffs on the chassis.
c. Slide the PCI connector posts on the system board into their slots on the server chassis.
NOTE
Step 3. Slide the system board back toward the rear of the server to secure the system board on its
standoffs. See Figure 4-54 and Figure 4-55 for more information.
Figure 4-54 Align the System Board PCI Connector
Chapter 4
The PCI cage must be removed from the chassis to install the system board. See
"Removing the PCI Card Cage" on page 79.
Removing and Replacing Components
Removing and Replacing Internal Components
Front of server
95