Figure 4-60 Remove The Psi Interface Module; Figure 4-61 Replacing The Power Supply Interface Module - HP Integrity rx2620 User's & Service Manual

Removing and Replacing Components
Removing and Replacing Internal Components

Figure 4-60 Remove the PSI Interface Module

Replacing the Power Supply Interface Module
Step 1. Place the PSI module into the chassis by sliding the module retaining tab into the socket on the
hard disk drive bay wall. See Figure 4-61 for more information.

Figure 4-61 Replacing the Power Supply Interface Module

Step 2. Screw in the PSI module mounting screw and secure the power cables behind the holding clips. See
Figure 4-62 for more information.
100
Front of server
Front of server
Chapter 4