Removing and Replacing Components
ESD Information
ESD Information
Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you
and the HP Integrity rx2620 server:
•
Use an anti-static wrist strap and a grounding mat, such as those included in the Electrically Conductive
Field Service Grounding Kit (HP 9300-1155).
•
Handle accessory boards and components by the edges only. Do not touch any metal-edge connectors or
any electrical components on accessory boards.
•
Do not wear clothing subject to static charge build-up, such as wool or synthetic materials.
Service Tools Required
Service of this product may require one or more of the following tools:
•
IPF CPU Install Tool Kit (P/N 5069-5441), consisting of:
•
Disposable ESD Kit
•
Label-less CPU install tool (2.5mm hex and Torx 15)
•
1/4 inch flat blade screwdriver
•
Phillips No. 1 Screwdriver
•
ACX-10 Torx screwdriver
•
ACX-15 Torx screwdriver
•
ACX-25 Torx screwdriver
46
Chapter 4