Figure 4-27 Removing The Processor Airflow Guide; Figure 4-28 Unscrew The Captive Screws - HP Integrity rx2620 User's & Service Manual

c. At the same time, grasp the back end of the airflow guide and lift the guide out of the server.

Figure 4-27 Removing the Processor Airflow Guide

Step 4. Disconnect the processor power cable from the server power cable.
Step 5. Disconnect the turbo fan power cable from the system board.
Step 6. Unscrew the two heat sink captive screws, and the four processor captive screws. See Figure 4-28
for the screw locations and removal sequence.

Figure 4-28 Unscrew the Captive Screws

Front of server
Chapter 4
5
4
Removing and Replacing Internal Components
3
6
Removing and Replacing Components
Front of server
Processor
unscrewing pattern
5
1
4
2
3
6
71