Dynamic Nat - D-Link DIR-620 User Manual

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Parameter
Port A port of the destination IP address. You can specify one port, several ports
"Destination" separated by a comma, or a range of ports separated by a colon.
Click the Change button.
To edit a rule for IP filtering, click the link to the relevant rule. On the opened page, change the
needed parameters and click the Change button.
To remove a rule for IP filtering, click the link to the relevant rule. On the opened page, click the
Delete button.

Dynamic NAT

On the Firewall > Dynamic NAT page you can create rules for dynamic network address
translation.
Dynamic NAT is a form of network address translation where the source address is set dynamically
on the basis of the address specified for the interface.
To create a new rule for dynamic network address translation, click the Add rule link.
Figure 54. The Firewall > Dynamic NAT page.
Page 70 of 98
Configuring via Web-based Interface
Description