DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
WPS
On the WPS tab you can enable the function for secure configuration of the WLAN and select a
method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function should be WPS-enabled.
!
Before using the WPS function it is required to configure a type of WPA encryption.
If the router's WLAN is splitted into parts (the value 2, 3, or 4 is selected from the MBSSID drop-
down list), the data fields on the tab display data on the WLAN part selected from the BSSID drop-
down list.
Figure 42. The tab for configuring the WPS function.
Page 51 of 98
Configuring via Web-based Interface