D-Link DIR-620 User Manual page 84

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Parameter
The state of connection to the WiMAX network.
Red light: The connection is not established.
Link status
Yellow light: The USB modem is connecting to the network.
Green light: The connection is established.
The MAC address of the WiMAX USB modem. Displayed when a relevant
MAC-address
USB modem is connected to the router.
The signal level at the input of the modem's receiver. Displayed when a
RSSI
relevant USB modem is connected to the router.
The relation of the signal level to the noise level. This parameter is used to
CINR measure the quality of the signal. Displayed when a relevant USB modem is
connected to the router.
The identifier of the base station. Displayed when a relevant USB modem is
Base station ID
connected to the router.
The signal level at the output of the modem's receiver. Displayed when a
Transmit power
relevant USB modem is connected to the router.
The frequency of the signal transmitted by the modem's receiver. Displayed
Frequency
when a relevant USB modem is connected to the router.
Change Click the button to save the parameters specified on this page.
Click the button to connect to the WiMAX network. The button is displayed
Connect
when the connection is not established.
Click the button to disconnect from the WiMAX network. The button is
Disconnect
displayed when the connection is established or is being established.
Description
Page 84 of 98
Configuring via Web-based Interface