Dynamic - D-Link Go-RT-N300 User Manual

N300 wi-fi router

Table of Contents

Section 3 - Configuration

Select DHCP Client to obtain IP Address information automatically from your ISP. Select this option if your ISP did not give you

any IP settings to use. This option is most commonly used for cable modem services and some DSL services.

Host Name:

The Host Name is optional but may be required by some ISPs.

The default host name is the device name of the router and may

be changed.

MTU Size:

Maximum Transmission Unit - you may need to change the

MTU for optimal performance with your specific ISP. 1492 is the

default MTU.

Attain DNS

Select if you automatically receive the DNS server(s) from your

Automatically:

ISP (enabled by default).

Set DNS

If you want to enter your own DNS server IP addresses, select

Manually:

this and enter the IP address(es) in the DNS Server 1 and 2 boxes.

WAN port rate:

Select the Internet port speed from the drop-down menu.

Default MAC:

Select to use the default MAC address assigned to the Internet

port on your router.

MAC from PC:

Select to copy the MAC address from the computer you are

currently on now to the router.

MAC manual:

Select to manually enter a MAC address to your router.

Apply Changes:

Click to save your settings.

D-Link GO-RT-N300 User Manual

Dynamic

Table of Contents