D-Link DIR-620 User Manual page 28

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Adding or Editing PPTP or L2TP Interface
You can specify or change the following parameters:
Parameter
Interface type
Connection
Username
Password
Server address The IP address of the PPTP or L2TP server correspondingly.
Default route
Metric
Figure 21. The page for adding a PPTP interface.
The type of configuration for this interface (PPTP or L2TP).
A name for this connection for easier identification (you can specify any
name).
The login to register on the PPTP or L2TP server correspondingly.
The password to register on the PPTP or L2TP server correspondingly. By
default, a value entered in this field is hidden with asterisks (*). To display it,
select the Show password checkbox.
Select this checkbox to use the IP address of the server as the default route
(the destination address for all packets, which routes have not been found).
This parameter is used to assign a priority for this interface. The lower the
value, the higher is the priority.
Description
Page 28 of 98
Configuring via Web-based Interface