D-Link DIR-620 User Manual page 13

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
1. Start a web browser (see the Before You Begin section, page 9).
2. In the address bar of the web browser, enter the IP address of the router (by default, the
following IP address is specified: 192.168.0.1). Press the Enter key.
Figure 5. Connecting to the web-based interface of the DIR-620 device.
3. On the opened page, enter the username (login) and password for the administrator account
(by default, the following username and password are specified: admin, admin). Then
click the Enter/Вход button.
If the error " The page cannot be displayed " (or " Unable to display the page "/" Could not
!
connect to remote server ") occurs upon connecting to the web-based interface of the router,
make sure that you have properly connected the router to your computer.
After successful registration the system statistics page opens. The page displays general information
on the router and its software.
Figure 6. The login page.
Figure 7. The system statistics page.
Page 13 of 98
Installation and Connection