D-Link DIR-620 User Manual page 69

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
You can specify the following parameters:
Parameter
Select an action for the rule.
ACCEPT – allows packet transmission in accordance with the criteria
Action specified by the rule.
DROP – denies packet transmission in accordance with the criteria specified
by the rule.
Source IP
The source host/subnet IP address.
address
Destination IP The destination host/subnet IP address.
A protocol for network packet transmission. Select a value from the drop-down
list available when the Main radio button is selected, or specify another
Protocol
protocol for network packet transmission (select the Other radio button and
enter the name of the protocol in the field to the right of the radio button).
A port of the source IP address. You can specify one port, several ports
Port "Source"
separated by a comma, or a range of ports separated by a colon.
Figure 53. The page for adding a rule for IP filtering.
Page 69 of 98
Configuring via Web-based Interface
Description