D-Link DIR-620 User Manual page 60

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Client
On the Client tab you can configure the router as a client to connect to a wireless access point.
As a rule, a client mode is used to connect to a WISP network. All parameters specified on this tab
should be provided by your WISP.
The following fields are available on the tab:
Parameter
Client
SSID
BSSID
Network
Authentication
Figure 46. The tab for configuring the Client mode.
Select the checkbox to configure the router as a client.
The name of the network to which the router connects.
The unique identifier of the network to which the router connects.
The authentication type of the network to which the router connects.
Page 60 of 98
Configuring via Web-based Interface
Description