D-Link DIR-620 User Manual page 25

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Configuring DHCP Interface
This interface type is available for the WAN and WIMAX interfaces. By default, the DHCP type is
specified for both interfaces.
Parameter
Interface type
MAC-address
Start
Click the Change button.
Figure 18. Configuring the WAN interface.
The type of configuration for this interface (DHCP).
Displayed for the WAN interface only.
This parameter is mandatory, if your ISP uses MAC address binding. In
the field, enter the MAC address registered by your ISP upon
concluding the agreement. You can click the Client MAC-address
button to set the MAC address of the network interface card (of the
computer that is being used to configure the router at the moment) as
the MAC address of the WAN interface.
Select a radio button to enable or disable the interface auto-start upon
the load of the router.
Page 25 of 98
Configuring via Web-based Interface
Description