D-Link DIR-620 User Manual page 71

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
Figure 55. The page for adding a rule for dynamic network address translation.
You can specify the following parameters:
Parameter
Address
The IP subnet to which this rule will be applied.
A protocol for network address translation. Select a value from the drop-down
list available when the Main radio button is selected, or specify another protocol
Protocol
for network address translation (select the Other radio button and enter the
name of the protocol in the field to the right of the radio button).
The ports for which the rule will be applied. You can specify one port, several
Ports
ports separated by a comma, or a range of ports separated by a colon.
Click the Change button.
To edit a rule for dynamic NAT, click the link to the relevant rule. On the opened page, change the
needed parameters and click the Change button.
To remove a rule for dynamic NAT, click the link to the relevant rule. On the opened page, click the
Delete button.
Description
Page 71 of 98
Configuring via Web-based Interface