D-Link DIR-620 User Manual page 34

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
You can specify the following parameters:
Parameter
Destination network A destination network to which this route is assigned.
Destination netmask The destination network mask.
Gateway
Metric
Via Interface
Click the Change button.
To edit an existing route, click the relevant route link. On the opened page, change the needed
parameters and click the Change button.
To remove an existing route, click the relevant route link. On the opened page, click the Delete
button.
Figure 26. The page for adding a static route.
An IP address through which the destination network can be accessed.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the
Automatically value of this drop-down list, the router itself sets the
interface on the basis of data on connected networks.
Page 34 of 98
Configuring via Web-based Interface
Description