D-Link DIR-620 User Manual page 44

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
By default, the Open network authentication type with no encryption is specified for the WLAN
(or every part of the WLAN).
The default security settings do not provide sufficient protection for the WLAN. Please,
!
specify your own security settings for the WLAN (or each part of the WLAN, if the
network was splitted into parts).
Figure 35. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type
Open
Open-IEEE8021X
Shared
WEPAUTO
WPA
WPA-PSK
WPA2
WPA2-PSK
WPA/WPA2 mixed
Figure 34. The default security settings.
Open authentication (with or without WEP encryption).
Open authentication using a RADIUS server
without WEP encryption).
Shared key authentication with
A mixed type of authentication. When this value is
selected, devices using the Open authentication type with
enabled WEP encryption and devices using the Shared
authentication type can connect to the router's WLAN.
WPA-based authentication using a RADIUS server.
WPA-based authentication using a PSK.
WPA2-based authentication using a RADIUS server.
WPA2-based authentication using a PSK.
A mixed type of authentication. When this value is
selected, devices using the WPA authentication type and
devices using the WPA2 authentication type can connect to
the router's WLAN.
Page 44 of 98
Configuring via Web-based Interface
Description
WEP encryption.
(with or