D-Link DIR-620 User Manual page 77

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
You can specify the following parameters:
Parameter
Rules name
A name for the rule for easier identification.
A port of the computer from your LAN, from which data are transferred to the
external network (outgoing traffic). From the Protocol drop-down list located
Outgoing
in this line, you can select a protocol, to which this rule will be applied upon
transferring data from the specified port.
A port of the router, which will be open to receive data from the external
network (incoming traffic). From the Protocol drop-down list located in this
Incoming
line, you can select a protocol, to which this rule will be applied upon receiving
data to the specified port.
Click the Change button.
To edit an existing rule for the Port Triggering function, click the relevant rule link. On the opened
page, change the needed parameters and click the Change button.
To remove an existing rule for the Port Triggering function, click the relevant rule link. On the
opened page, click the Delete button.
Description
Page 77 of 98
Configuring via Web-based Interface