D-Link DIR-620 User Manual page 30

DIR-620 Multifunction Wireless Router Supporting 3G/2G, CDMA, WiMAX
with Built-in 4-port Switch
User Manual
You can specify or change the following parameters:
Parameter
Interface type
Connection
Interface
Username
Password
Access
concentrator name
Service name
Default route
Metric
Start
After clicking the Change button you will be forwarded to the Net > P-t-p interfaces page.
The type of configuration for this interface (PPPoE).
A name for this connection for easier identification (you can specify any
name).
A physical interface of the router, to which the configured PPPoE
interface will be assigned.
The login to register on the PPPoE server.
The password to register on the PPPoE server. By default, a value entered
in this field is hidden with asterisks (*). To display it, select the Show
password checkbox.
The name of the provider's PPPoE server.
The name of the service on the provider's PPPoE server.
Select this checkbox to use the IP address of the server as the default route
(the destination address for all packets, which routes have not been
found).
This parameter is used to assign a priority for this interface. The lower the
value, the higher is the priority.
Select a radio button to enable or disable the interface auto-start upon the
load of the router.
Page 30 of 98
Configuring via Web-based Interface
Description