Safety and Symbols This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations are as follows: Clip ring Screw Connector Clamp Short Edge Feed Long Edge Feed [A] Short Edge Feed (SEF) [B] Long Edge Feed (LEF) Trademarks ®...
The Aim of Anti-tip Components and Precautions The anti-tip components are necessary for meeting the requirements of IEC60950-1, the international standard for safety. The aim of these components is to prevent the products, which are heavy in weight, from toppling as a result of people running into or leaning onto the products, which can lead to serious accidents such as persons becoming trapped under the product.
TABLE OF CONTENTS Safety and Symbols............................1 Trademarks..............................1 The Aim of Anti-tip Components and Precautions..................2 1. Replacement and Adjustment Rear Cover................................5 Front Cover................................8 Upper Cover...............................9 Right Cover...............................10 Pick-up Roller, Feed Roller, Friction Roller.....................11 Paper Feed Motor............................14 Transport Motor...............................15 Tray Lift Unit..............................16 Controller Board...............................17 LCT Set Switch (Front)............................18 LCT Set Switch (Rear)............................19...