Table of Contents
Advertisement
182 Sample installation output
Installing the VCS One Policy Master with NetApp
Confirming the Policy Master virtual IP address configuration
Choosing a storage architecture
Only one IP address 10.182.7.218 is detected for NIC eth2 under
system thoropt158. This IP address will be set as the base IP.
Only one IP address 10.182.7.219 is detected for NIC eth2 under
system thoropt159. This IP address will be set as the base IP.
Enter one or more Virtual IPs separated by space for the Policy
Master: [b,q,?] 10.182.14.6
Checking the 10.182.14.6 virtual IP address ............ Not in use
Enter the netmask for IP 10.182.14.6: [b,q,?] (255.255.240.0)
Veritas Cluster Server One 5.0.0 by Symantec
Policy Master configuration verification:
Virtual IP 1:
Virtual IP: 10.182.14.6
Netmask: 255.255.240.0
NIC(s) under thoropt158:
1: NIC - eth2; IP - 10.182.7.218
NIC(s) under thoropt159:
1: NIC - eth2; IP - 10.182.7.219
Is this information correct? [y,n,q] (y)
Veritas Cluster Server One 5.0.0 by Symantec
VCS One PM should use shared storage for storing Configuration
Database
The following storage architectures are supported for storing VCS
One PM Configuration Database:
1. NetApp filer -- Shared storage exported by a specified NetApp
filer server
2. Other -- A local storage or a shared storage exported by an NFS
server and accessible by all the systems
Symantec recommends to use different shared storages for different
VCS One Policy Master server farms.
Storage architecture:
1)
NetApp filer
2)
Other
Please select a kind of Storage Architecture for the Configuration
Database with the index number: [1-2,q] 1
Advertisement
Table of Contents
Troubleshooting
