Table of Contents
Advertisement
140 Sample Policy Master upgrade scenarios
Upgrade scenario details
Deleting a VCS One 2.0.1 system and upgrading it to 5.0
Follow the instructions in this section to delete a VCS One 2.0.1 system, and
upgrade that system to VCS One 5.0.
To delete a VCS One 2.0.1 system and upgrade it to 5.0
1
Delete Node2 from your 2.0.1 Policy Master cluster. Enter the following:
#
./installvcsonepm -deletenode
See:
"Deleting a system from your VCS One 2.0.1 Policy Master
page 117.
2
Check that Node2 is running an operating system that VCS One 5.0
supports. Do one of the following
If Node2 is running a supported operating system, skip to
■
If Node2 is not running a supported operating system, install or
■
upgrade to a supported operating system. Then, go to
For information on supported operating systems, see Veritas Cluster Server
One Release Notes.
3
Upgrade Node2 to VCS One 5.0. Enter the following:
#
./installvcsonepm -installonly
See:
"Installing the VCS One 5.0 Policy Master on two new
page 137.
Migrating configuration and database data to a new system
Migrate the VCS One 2.0.1 Symantec Product Authentication Service and
database data. Migrate the data from Node1 to Node2.
To migrate the configuration data and database data to the new system
◆
Enter the following:
#
./installvcsonepm -migrate
For more information on the migration process, see
configurations to VCS One
Upgrading a 2.0.1 system and adding it to the 5.0 Policy
Master cluster
Follow the instructions in this section to upgrade Node1 to VCS One 5.0, and
then add it to the VCS One 5.0 Policy Master cluster.
To upgrade a 2.0.1 system and add it to the VCS One 5.0 Policy Master cluster
1
Check that Node1 is running an operating system that VCS One 5.0
supports. Do one of the following
5.0" on page 120.
cluster" on
step
3.
step
3.
systems" on
"Migrating your 2.0.1
Advertisement
Table of Contents
Troubleshooting
