Symantec XGS-4728F Installation Manual page 53

Aix, hp-ux, linux, solaris 5.0
Table of Contents

Advertisement

5
Enter the password for accessing the Network Appliance filer. At the
prompt, enter the password again.
6
For each Policy Master system, enter the host name or IP address for each
NIC that is connected to the NetApp Filer. For example, enter the following:
#
thoropt158.
7
On the NetApp filer you designate to store the VCS One configuration, enter
the exported file system pathname. For example, enter the following:
#
/vol/name_of_volume /name_of_directory_path
8
At the API over SSL prompt, do one of the following:
If you do not want to use API over SSL, enter the following: n.
If you want to use API over SSL, enter the following: y. At the prompt,
enter the SSL library path. The path should be on a local disk, and must
contain the libcrypto.so and libssl.so library files. For example, enter
the following: /usr/lib.
9
If you have mounted something on the mount point you specified, the
installer asks you if you want to unmount it. Do one of the following:
If you are prompted to unmount the mount point, go to
If you are not prompted to unmount the mount point, go to
10 At the prompt for unmounting the mount point, do one of the following:
If you do not want to unmount the mount point, enter the following: n.
If you want to unmount the mount point, enter the following: y.
11 Confirm that the Network Appliance filer configuration is correct. Enter the
following: y.
If the installer uses an existing Network Appliance filer for the
configuration database, you are prompted about cleaning up the shared
storage directories.
12 Do one of the following:
If you are not prompted to
clean up the shared storage
directories
If you are prompted to clean
up the shared storage
directories
Installing and configuring the VCS One Policy Master
Configuring the Policy Master
Go to:
"Starting the Policy Master"
Clean up the shared storage directories to prevent the
installation from failing. At the prompt for
performing cleanup, enter the following: y.
Then, go to:
"Starting the Policy Master"
step
10.
step
11.
on page 54.
on page 54.
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Veritas cluster server oneVcs one

Table of Contents