Table of Contents
Advertisement
124 Upgrading from VCS One 2.0.1 to 5.0
Upgrading the client
Upgrading the client
Backing up your 2.0.1 configurations
Uninstalling the 2.0.1 client on one system
This section provides instructions for upgrading the VCS One client from 2.0.1
to 5.0, including the following subsections:
■
"Backing up your 2.0.1
■
"Uninstalling the 2.0.1 client on one
■
"Installing and configuring the 5.0
■
"Upgrading the 2.0.1 client to 5.0 on additional
Before you upgrade your 2.0.1 client systems to VCS One 5.0, you should back up
the configurations on each of your client systems.
To back up your 2.0.1 configurations
1
Create a backup directory on each client system. Enter the following:
# mkdir /backup
2
Copy the vcsone.conf file into the backup directory for each system. Enter
the following:
# cp /etc/VRTSvcsone/vcsone.conf
3
Check that the service groups on each client system are up and running.
Enter the following:
# /opt/VRTSvcsone/bin/hagrp -state
Follow the instructions in this section to uninstall one of your client systems.
You will uninstall the rest of the systems in a later section,
client to 5.0 on additional
To uninstall the 2.0.1 client system
1
Log in as root on the client system.
2
Navigate to the directory containing the VCS One installer. Enter the
following:
# cd /opt/VRTS/install/
3
Start the uninstallation script. Enter the following:
# ./uninstallvcsonecd my_machine3
configurations" on page 124
system" on page 124
client" on page 125
/backup/
systems" on page 125.
systems" on page 125
"Upgrading the 2.0.1
Advertisement
Table of Contents
Troubleshooting
