Table of Contents
Advertisement
172 Sample installation output
Installing the VCS One Policy Master with Storage Foundation
Installing packages
Starting Storage Foundation processes
Configuring Storage Foundation
Veritas Cluster Server One 5.0.0 by Symantec
Logs for installer are temporarily being created in /var/tmp/
installer-eKiPxL
Installing VCS One PM: 100%
Installation completed successfully on all systems
Veritas Cluster Server One 5.0.0 by Symantec
Starting Storage Foundation Processes
Starting the vxconfigd process on redhat95243 ................. Done
Starting the vxrelocd process on redhat95243 ................. Done
Starting the vxconfigbackupd process on redhat95243 .......... Done
Starting the vxconfigd process on pilotvmred9 ................ Done
Starting the vxrelocd process on pilotvmred9 ............... Done
Starting the vxconfigbackupd process on pilotvmred9 ........ Done
Veritas Cluster Server One 5.0.0 by Symantec
VCS One PM can use Storage Foundation for storing configuration
information
The following information is required to configure Storage
Foundation:
-- Name of the existing diskgroup or the diskgroup you are creating
-- Disk(s) need(s) to be part of the diskgroup to be created
-- Name of the volume that already exists or is being created in the
diskgroup
-- Size of the volume to be created
-- Mount point where the volume to be mounted
Note: Storage Foundation configuration will be performed on the
first system redhat95243
Storage Foundation information:
System : redhat95243
Free disks : sda sdb sdc
No diskgroups found on redhat95243
Advertisement
Table of Contents
Troubleshooting
