Setup And Configuration Profile: Power Policy Tab; Setup And Configuration Profile: Domains Tab - Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0 Manual

38 About Out of Band Management Component pages
Configuration Profiles page

Setup and configuration profile: Power Policy tab

Setup and configuration profile: Domains tab

Options on the Wireless profiles tab (continued)
Table 2-11
Option
Allow wireless connection
without profile
Use these settings to determine what is the highest power state when the Intel
AMT devices that are assigned to this profile will be active or will activate from
a sleep state.
Options on the Power policy tab
Table 2-12
Option Description
Intel AMT is ON in This parameter defines the highest power state at which Intel AMT
the following host will operate while the device is connected to AC power. Note that
sleep states this includes operation in higher power states. For example, if the
platform is in S3 and this parameter is set to Host is ON (S0), the
Intel AMT device will not operate until the platform returns to S0.
Default: Intel AMT is always on (S0-S5).
Idle timeout Once the Intel AMT device wakes up and the host system is not
turned on, this parameter determines the minimum time (in
minutes) that the Intel AMT device remains operable when there
is no activity. The device returns to a sleep state after the idle
timeout period. The timeout timer is restarted whenever the device
is serving requests. If the value of the parameter is zero (the default
value), the device will remain on when there is no activity. For
example, the AMT is ON parameter is set to Host is ON (S0) or in
Standby (S3). When the platform transitions to S3, the Intel AMT
device remains awake until there is no activity for the number of
minutes set in the Idle Timeout. At that point the device reduces
power. Any network access to the Intel AMT device causes it to
wake up and restart the timeout timer.
If you want to use this parameter, set it to three minutes at a
minimum.
The Domains tab defines the domains from which an Intel AMT computer can
initiate configuration by Intel SCS.
Click the Add symbol to add a domain.
Description
Check to allow Wi-Fi connection even without a profile
(using the host s Wi-Fi settings).