Confirming The Vcs One Policy Master Cluster Configuration - Symantec XGS-4728F Installation Manual

168 Sample installation output
Installing the VCS One Policy Master with Storage Foundation

Confirming the VCS One Policy Master cluster configuration

Configuring the Policy Master virtual IP addresses
Would you like to configure a second private heartbeat link?
[y,n,q,b,?] (y)
Enter the NIC for the second heartbeat link on redhat95243: [b] eth2
Do you want to configure an additional low priority heartbeat link?
[y,n,q,b,?] (n)
Are you using the same NICs for private heartbeat links on all
systems? [y,n,q,b,?] (y)
Would you like to use the default port number 14159 for
Authentication Services? [y,n,q,b] (y)
Veritas Cluster Server One 5.0.0 by Symantec
Policy Master cluster configuration information verification:
Cluster Name : vcsonepm_cluster
Cluster ID : 12312
Broker Port : 14159
Private Heartbeat NICs for redhat95243:link1=eth1 link2=eth2
Private Heartbeat NICs for pilotvmred9:link1=eth1 link2=eth2
Veritas Cluster Server One 5.0.0 by Symantec
The following information is required to configure the Policy
Master:
Public NICs used by each system in the Policy Master cluster
Policy Master virtual IP addresses and netmasks
Active NIC devices discovered on redhat95243:
NIC : IP Address : Netmask
---------------------------------------
eth0 : 10.198.95.243 : 255.255.248.0
Active NIC devices discovered on pilotvmred9:
NIC : IP Address : Netmask
---------------------------------------
eth0 : 10.198.92.157 : 255.255.248.0
eth1 : 192.168.100.101 : 255.255.248.0
eth2 : 192.168.100.102 : 255.255.248.0
Enter the NIC for Policy Master Virtual IP address on redhat95243:
[?] (eth0)
Would you like to use the same NIC (eth0) on all PM nodes? [y,n,q]
(y)