2-3 Loading the Material
Load roll material at the proper
position.
Otherwise the roll may
fall, resulting in injury.
NOTICE
Before loading roll material, be sure to install the media guide.
Acceptable material widths
Loading Roll Material
Remove the media cover.
1
Open the front cover.
2
Line up with the core diameter of the loaded roll material and refit the left- and right-hand media flanges.
3
(1)
(3)
(2)
Flange retaining pin
Line up the ridges and grooves.
When closing the front cover, be
careful not to pinch your fingers.
Doing so may result in injury.
FJ-500
210 to 1371 mm (8-5/16 to 54 in.)
FJ-400
210 to 1117 mm (8-5/16 to 44 in.)
Media cover
Media flange
2 Basic Operation
Media flange
76.2 mm
50.8 mm
(3 in.)
(2 in.)
(4)
21