How To Replace The Separating Knife - Roland FJ-500 User Manual

3 Maintenance

3-6 How to Replace the Separating Knife

Do not touch the tip of the
separating knife with your fingers.
Doing so may result in injury.
NOTICE
When replacing the knife, do not pull out the carriage.
If the machine is allowed to stand for a prolonged period with the carriage pulled out, head clogging or even
damage to the printing heads may occur.
If the separating knife becomes dull, replace with the included replacement blade.
Press the [POWER] key to switch off the power.
1
Turn off the main power switch.
2
3 Remove the separating knife.
58
Make sure the power to the unit is
off before attempting to replace the
separating knife.
Doing so may result in injury.
The POWER LED goes out
Switch to "O"
(2) Grasp the screw portion, and slowly pull it out in the
direction of the arrow.
(1) Loosen the screw until it slips out.
* If a blade remains in the carriage, use the tweezers in
the cleaning kit to remove it.
* Do not pull back
while doing this.