Bidirectional Correction - Roland FJ-500 User Manual

2 Basic Operation

Bidirectional Correction

* Only when the printing direction at the [PRINT QUALITY] menu has been set to [BI-DIRECTION] (bidirectional)
This adjusts slippage when performing bidirectional printing.
Make this adjustment when you have replaced the material with a different type or adjusted the head height.
1
Press the [MENU] key and [
following screen appear on the display.
2 Press the [ ] key to make the following screen
appear on the display.
3 Press the [ENTER] key to start printing a test pattern.
Check the test pattern and choose a value with no
4
displacement.
Test pattern
+20 +19 +18 +17 +16 +15 +14 +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1
5
Press the [ ] key to make the following screen
appear on the display.
6 Press the [ ] key to make the following screen
appear on the display.
7
Use the [ ] and [
checked in step 4, then press the [ENTER] key.
36
] key to make the
Value with no displacement
] keys to set the value you
Current setting
0 -1 -2 -3 -4 -5 -6 -7
ADJUST BI-DIR
SETTING
SETTING
0 +5
-15 to +15 (In steps of 1)
MENU
ADJUST BI-DIR
ADJUST BI-DIR
TEST PRINT
-8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20
SETTING
0 0