For a network connection
* Various settings are required when using the FJ-500/400 in a network environment.
For more information, see the following materials.
- "4-6 Network Connection" in this document
- "Roland-PrintServer Installation Manual" (PDF file), on the included Roland-PrintServer CD-ROM
- "Roland-PrintServer User Manual" (PDF file), on the included Roland-PrintServer CD-ROM
- "Roland-PrintServer for Macintosh Users" on the separate sheet
When You're Finished Making the Connections
RJ-45 (Ethernet) connector
(10Base-T or 100Base-TX)
Network cable
Ethernet
Pass the cable through here.
1 Introduction
15