Making The Connections; Connecting The Power Cord - Roland FJ-500 User Manual

1-2 Making the Connections

Use only with a power supply of the
same rating as indicated on the unit.
Use with any other power supply may lead
to fire or electrocution.
NOTICE
Before connecting the cable, make sure the computer's power and the FJ-500/400's main power switch are
switched off.
Securely connect the power cord, computer I/O cable and so on so that they will not be unplugged and cause
failure during operation. Doing so may lead to faulty operation or breakdown.
Arrange the power cord and interface connection cable to prevent tripping when moving around the unit.
Pass the cable through the established location, making sure that it does not touch the loaded material.
If the cable touches the material during printing, material feed may be obstructed, resulting in poor printing
accuracy.

Connecting the Power Cord

Side View
Power Connector
Ground the unit with the ground
wire.
Failure to do so may result in risk of
electrical shock in the even of a mechanical
problem
Power connector
Power outlet
Power cord
1 Introduction
13